ISE upgrade

[sridhar ch]

Hi,

I have been suggested by TAC to upgrade ISE to 1.3 ver to use any connect ver 4 ISE posture module instead of NAC agent. Just want to check if i need to upgrade WLC, NCS Prime and MSE also to compatible with ISE 1.3 ver?

current versions:

WLC	AIR-CT2504-K9	7.3.112.0
NCS	PRIME-NCS-APL-K9	2.1.0.0.87
MSE	AIR-MSE-3355-K9	7.2.110.0
ISE	ISE3315	1.2.0.899

Thanks,

Sridhar

[Rasika Nayanajith]

Refer below for compatibility information

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

As a general advice, I would suggest you to move to 8.0.x code for WLC perspective (as long as you got AP model that support 8.0). Current code you are running already deferred, so TAC would suggest to upgrade it if you log a case for it.

Prime, go for 3.1 as version you are running is bit old.

MSE, go with 8.0.x

HTH

Rasika

*** Pls rate all useful responses ***