cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
471
Views
5
Helpful
2
Replies

Latest Code 8.3.102.0 - Workgroup Bridge (WGB) Downstream Broadcast On Multiple VLANs

Cormac Champion
Level 1
Level 1

Am I reading this correctly, is this basically supporting .1q trunks over WGB links ?

1 Accepted Solution

Accepted Solutions

Yes, in order to support broadcast forwarding on non-native vlans.

Read below

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_01110110.html#id_32817

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

2 Replies 2

Yes, in order to support broadcast forwarding on non-native vlans.

Read below

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_01110110.html#id_32817

HTH

Rasika

*** Pls rate all useful responses ***

Has anyone successfully gotten multi-VLAN WGB broadcast to work?  I've thrown in the broadcast-tagging commands on the WLC and the WGB, but still only have downstream broadcast on the native VLAN.

Review Cisco Networking for a $25 gift card