cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1451
Views
0
Helpful
15
Replies

Layer 2 isolation due to Multiple Anchor controllers

jbeltrame
Level 1
Level 1

Hello,

Just checking to see if there are 2 anchor controllers in different locations, that if client A connects to anchor controller A and client B connects to anchor controller B, will there be Layer 2 isolation between the 2 clients?

Thanks,

Jason

15 Replies 15

same subnet but different anchors in different parts of the US. so hosts local to that anchor are switched. the networks are not shared except the same L2 subnet, and the original controller. so what would have to happen is that host traffic would have to cross back over the EoIP tunnel to the internal controller, and then cross the other EoIP tunnel back to the other controller to talk to those hosts. I don't believe this is possible, but want to confirm that. this was setup by an outside consultant before I got there.

thanks,

Jason.

Sent from Cisco Technical Support iPad App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: