Hi All,
I use Cisco Aironet 350 series to provide point to point connection of about 15 KM distance. The configuration is as follows:
CSAC Ver 3.0---HUB ----|---RootBridge(SSID 1)
|---Non-Root (SSID 2)----Root (SSID 2)---|-HUB
RootX(SSID1)--|
RootBridge has been configured for LEAP authentication and works well for all clients connecting to it. However, Clients connecting to the network through RootX cannot be authenticated eventhough all bridges have LEAP enabled.
Any suggestions?
Thanks.
Chafe