LEAP authentication on WCS ap's

[jsoffer]

I have old handheld devices that are using LEAP authentication to a local radius server. They are currently connected to IOS based access points. I am trying to convert the site to controllers /lwapp, but I cannot

get LEAP to work through the controller. (All other clients/devices are working fine).

Here are the settings for my ssid/radio that the clients use for LEAP on the IOS based ap's:

ssid xxxxxx

authentication open eap eap_methods

authentication network-eap eap_methods

int ...radio0

encryption mode ciphers tkip wep128

broadcast-key change 900

------------------------

I've tried every option under the controller - wlans -> security -> layer 2, but the handhelds still don't get an IP address or connect correctly. Any ideas? Or is LEAP just not compatable with WCS?

[sanamon]

Have you configured the WLC(s) as NAS on the radius server?

What kind of RADIUS server are you using?

Anything in the logs on it when it fails?

[jfafinski]

Hi,

I'm currently having some problems with LEAP and Intel 2200BG wifi cards. Maybe your problem only comes from your wireless NIC.