cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2536
Views
0
Helpful
15
Replies

Loading Autonomous firmware to 1552E

servisturk
Level 1
Level 1

Hi,

i got a problem with changing 1552e firmware to autonomous. i made many times other ap' s firmware change but now something wrong. i installed the tftpd server to machines it s working ok.image is :c1520-k9w7-tar.default. my pc ip address 10.0.0.2/24. pushing to reset button and release and 1552 loading default config. tftpd server doen t create any log. the ap i think doesn t look a tftp server. anyone has any idea about the issue? thanks.

15 Replies 15

Erwin Salazar
Cisco Employee
Cisco Employee

Hi Ilkay,

Were you holding the reset button down for at least 20-30 seconds? An easier way may be to console directly into the device and issue the following command through CLI:

debug capwap console cli

archive download-sw /force /over tftp:///.tar

Cheers,
Erwin

______________________________________

How helpful was I? Don't forget to rate me when you have the chance!

Cheers, Erwin ______________________________________ How helpful was I? Don't forget to rate me when you have the chance!