04-15-2009 04:07 PM - edited 07-03-2021 05:26 PM
We have two 1232 APs running 12.3(8)JEA software and about 15 USB radios (B/G) made by Via that are having problems staying connected. The problem is very intermittent and is driving us crazy!! We are also seeing an issue with a NetGear PCI card taht's in a PC. We recently disabled all the 802.11G radio settings but didn't see much improvement.
Thanks
04-15-2009 05:50 PM
Can you post your config?
04-15-2009 09:18 PM
Radio Settings:
A radio is off G is on
Wep (short key) is enabled
All OFDM rates are disabled
1,2,5,and 11 mb = Require
CCK Transmit = max
OFDM Transmit = max
Client Power local = Enable
Limit Client Power = Max
Channel is 11 (other AP is 6)
World mode = disable
Country = blank
Preamble = short
Rx and Tx Antennas = diversity (ap has two whips)
External antenna = disable
Traffic stream = disable
Aironet extensions = disable
Ethernet Encapsulation Transform:= RFC1042
Reliable Multicast to WGB: = Disable
Public Secure Packet Forwarding:= Disable
Short Slot-Time: = Enable
Beacon Privacy Guest-Mode:= Disable
Beacon Pd. = 100
Max Data Retries = 64
Frag threshold = 2346
Data Beacon (DTIM) = 10
RTS Max retries = 64
RTS Threshold = 2347
Route Parent Time Out = 0 rest are blank
Security: Global SSID Manager
SSID Interfaces are set for both A and G radios even the A radio is not enabled
Method accepted is Open Authentication with no addition
Server priorities are both at default
Key Mgmt = None
CCKM and WPA are not checked
WPA shared key is blank
Accounting is left at defaults
General settings box--nothing checked everything left blank, disabled or none
Multiple BSSID Beacon Settings box--nothing checked or enabled
Guest Mode/Infrastructure SSID Settings = Single BSSID
Hope this is what you were looking for, let me know if you need anything else.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide