Point to point with repeater

[FreddyLoi]

Hi All

I have a question on which i cannot find an solution.

We need to build a wirelss P2P connection with no line of sight.

But we have some difficulties configuring the repeater, or at least

the two endpoint don't see each other.

Unfortunatly I can't provide any running config's, but if anyone has a suggestion.

Please let me know.

[Nicolas Darchis]

A repeater connection with no line of sight doesn't sound good. What is the distance between the bridges ? Are there walls in between ?

Can you take a client and walk to the repeater position and see if you can get a signal from the root AP ?

Nicolas

[FreddyLoi]

The distance between the access points is:

Aironet -------- 400 meters ------------- REPEATER -------------- 50 meters ----------- Aironet

There are no walls in between.

Thanks

[Nicolas Darchis]

400 is a lot for normal AP. What AP model is it and what antenna model do you have on it ? (on the aironet on the left of your diagram)

[FreddyLoi]

Hi

I'm not a the side right know, but I just heard they got itsorted

out.

We configured it as Non-root--Root---Non-root bridge.

Kind regards