Problem with Cisco AIR-MSE-3310-K9

[Dmitriy Kulakovskiy]

Hello

There is a problem with Cisco AIR-MSE-3310-K9.

Has failed one of the hard drives. After replacing it, raid status changed to "Rebuild".

It was reported that the replication will be executed automatically when the system boots.

After the system boots it has not been happend.

After logging in to the system, receiving  message: "One of the hard drives in the RAID-1 array has failed".

I request to provide some help with the problem.

[Scott Fella]

You should really open a TAC case as they can tell you for sure if there is something else wrong and maybe the unit has to be replaced. This would be faster than having to try to troubleshoot especially with a down hardware.

Sent from Cisco Technical Support iPhone App