05-28-2020 12:55 AM - edited 07-05-2021 12:06 PM
I am using Cisco Wireless Controller 3504 running 8.10.112.0. I use this WLC for two site, both of them running flexconnect mode. On 1 site, I have a SSID using PSK as security. Recently, some endpoint (android smartphone) cannot connect to that SSID.
Can you help me to solve this issue?
Thank you.
Best regards,
Solved! Go to Solution.
06-03-2020 08:43 AM
Finally a solution to see the light at the end of the tunnel:
HTH
-Jesus
*** Please Rate Helpful Responses ***
05-28-2020 01:29 AM
can you paste the output of these command:
sh wlan <id>
debug clinet <mac address>
Regards
Dont forget to rate helpful posts
05-28-2020 01:43 AM - edited 05-28-2020 01:44 AM
Hi Sandeep.
I attached the output of show_wlan_id. I try to debug_client with the affected mac address, but no log is shown.
Best regards,
Lazuardi Nurfaiz
05-28-2020 02:50 AM
configuration looks all right. Please try the solution mentioned by Jesus Pavon and let us know.
Regards
Dont forget to rate helpful posts
05-28-2020 03:45 AM
There is another workaround to disable SHA1 and only use WPA2-SHA256 with FT disabled.
Can you share the device models affected by the issue? It all appears to be an issue related to latest Qualcomm chipsets' firmware with Cisco's IE att 44.
HTH
-Jesus
*** Please Rate Helpful Responses ***
05-28-2020 10:29 AM
So far the affected by this issue is Android Smartphone using Android firmware version 10.
06-03-2020 08:43 AM
Finally a solution to see the light at the end of the tunnel:
HTH
-Jesus
*** Please Rate Helpful Responses ***
06-05-2020 05:56 AM
Thank you! After enabling FT on WLAN, all android 10 are able to connect.
05-28-2020 01:39 AM
Are those unable-to-connect devices using Android 10?
If so, please check this thread:
HTH
-Jesus
*** Please Rate Helpful Responses ***
05-28-2020 01:51 AM
Hi Jesus.
Yes, exactly. All of the affected devices use Android 10. Thank you for the link. I will try to use solution in that link.
Best regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide