"config network ap-priority" command equivalent in Catalyst 9800

[rezaalikhani]

Hi all;

As far as I know, to disable AP Failover Priority functionality in AireOS-based WLCs, you can use the "config network ap-priority" command. Right? Now, Is it possible to achieve the same functionality in Catalyst 9800?

Another question is that, what happens when we disable AP Failover Priority in general?

Thanks

[MHM Cisco World]

https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/17-6/config-guide/ewc_cg_17_6/ap_priority.pdf

when you disable this Op and WLC is full the AP will not have high priority to join WLC than other AP

MHM

[Flavio Miranda]

@rezaalikhani 

 First, this feature only make sense if you have more than one WLC available.  If you do and you disable it, , AP will connect to the first WLC they receive a capwap offer.

 This is somehow a filter to control AP joining in case you have, for example, not enough license in case one WLC drops.

And you answered your first question on the second question.

[rezaalikhani]

Thanks for your reply;

How can I achieve the same functionality regarding to using the "config network ap-priority" command in Catalyst 9800?

Thanks

[MHM Cisco World]

Did you ever check link I share??

MHM

[Flavio Miranda]

@rezaalikhani 

Procedure