07-20-2017 01:34 AM - edited 07-05-2021 07:22 AM
Hi, what is the latest recomended Controller software for 8510 series ?
And is there a good guide how to Upgrade HA Controllers ?
Johann Folkestad
07-20-2017 04:02 AM
Use either 8.0.140.0 or 8.2.151.0
These are the two stable version which I can recommend.
Regards
Dont forget to rate helpful posts
07-20-2017 04:59 AM
Thanks, we are running 8.2.141.0, so I'll go for 8.2.151.0
Regards
JFolkestad
07-23-2017 08:33 AM
Just out of curiosity, why do you want to upgrade? Are there issues you are currently running into which you want to resolve?
In my own experience with AireOS deployments: unless there is a strong reason based on required functionality or a major security issue which you cannot mitigate: stick to your "stable" situation.
07-20-2017 07:48 PM
I'd stick with 8.2.141.0.
07-20-2017 04:05 AM
The above link is a good source for choosing release.
What HA are you using, N+1 or AP/Client SSO?
07-20-2017 05:04 AM
Thanks .
Redundancy mode is SSO
Regards
JFolkestad
07-20-2017 05:52 AM
With SSO you just need to follow the normal upgrade procedure on the active controller and it'll transfer the updated code onto secondary.
Just make sure to check the peer status is STANDBY HOT before rebooting otherwise the new code will not be transferred.
Both controllers will go down when you reboot the active one. You can do a pre-upgrade of the APs one you've transferred the new code to reduce downtime.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide