cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4191
Views
0
Helpful
5
Replies

WiFi unstable

Fabian11
Level 4
Level 4

Hi everyone,

we have an odd issue. We are testing two CW9164I, where we have clients getting 3x "Destination Host Unreachable" than pings are fine, and after a while it comes up again. So Google Meet etc is not working properly, because they have these connection errors sometimes.

On dashboard everything looks great, all green, no problems found here. The client also looks great, performance is fine (on dashboard).

Same location with MR34 and MR42, no problems at all.

Any ideas what could make these losses?

Thank you

1 Accepted Solution

Accepted Solutions

if you have Client Balancing enabled on the affected SSID(s) then try disabling this as it can cause disconnects for clients

View solution in original post

5 Replies 5

MerakiGnome
Meraki Community All-Star
Meraki Community All-Star

Hi @Fabian11 , sounds like a design/AP placement issue. Without surveying etc it would be difficult to say to be sure.

The cloud connection piece isn’t the issue here as clients would/should continue to work even if the AP was offline from the dashboard.

Is this issue happening across all devices connected to the APs in question? Are clients bouncing from one AP to another?

Darren OConnor
https://www.linkedin.com/in/darrenoconnor

I figured out, that it's caused by roaming. Both APs are roaming the clients between each other.

Are radio settings a solution here? Or simply disable roaming on all ssids?

if you have Client Balancing enabled on the affected SSID(s) then try disabling this as it can cause disconnects for clients

Thank you

We are trying this for now, we still have clients with suboptimal roams

BraydenHale
Community Member

Replying for the update.

Review Cisco Networking for a $25 gift card