12-13-2012 11:33 AM - edited 07-03-2021 11:13 PM
I have a project where I need to connect two building using a wireless brige.
I cisco specialist told me to purchase two 3500 (AIR-CAP3502P-A-K9) access points and an external antennas.
The problem I have is these access points will need something to control them. If the access points will be in separate buildings will I need a controller on either side of the bridge to get them to work?
What other cisco AP device capable of 300Mps dual band that are autonomous and can bridge between two buildings that are a 50 yards apart?
Solved! Go to Solution.
12-13-2012 11:38 AM
There is an iOS image for the 3500, but why pay the extra for clean air when it won't work in iOS mode?
Go with the 1262 and external antenna.
Steve
Sent from Cisco Technical Support iPhone App
12-13-2012 11:38 AM
There is an iOS image for the 3500, but why pay the extra for clean air when it won't work in iOS mode?
Go with the 1262 and external antenna.
Steve
Sent from Cisco Technical Support iPhone App
12-13-2012 11:49 AM
Thanks for the quick response.
Can I use the air-ant25137np-r antenna as I was planning on using with the 3500 wap?
12-13-2012 11:50 AM
That should work
Steve
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide