WiSM and VLANs

[Maximiliano.Garcia.Solorzano]

I am setting up a wism and have a question:

If I create a user vlan 30 on the wlc(wism), do I need to create this vlan 30 on the supervisor 720?

[Scott Fella]

If you create any interface on the WLC, then you will have to create the vlan on the switch, or else the switch will drop the frame.

Take a look at this:

http://cisco.com/en/US/docs/wireless/technology/wism/technical/reference/appnote.html

[Maximiliano.Garcia.Solorzano]

thank you. I was not clear because there is no explicit explanation. I know that this is a requirement in WLSM but now I know that is for WiSM to.

Best, Maximiliano.