Below config is on Auto AP. How do I configure the WiSM controller for 'authentication open mac-address mac_methods eap eap_methods '
aaa group server radius rad_eap
server 134.226.16.92 auth-port 1645 acct-port 1813
server 134.226.249.74 auth-port 1645 acct-port 1813
!
aaa group server radius rad_mac
server 134.226.16.92 auth-port 1645 acct-port 1813
server 134.226.249.74 auth-port 1645 acct-port 1813
dot11 ssid Test1
vlan 6
authentication open mac-address mac_methods eap eap_methods
authentication network-eap eap_methods mac-address mac_methods
authentication key-management wpa optional
accounting acct_methods
Please advise.
Thanks
