hi all,
i got a WLC 2504 connected to a WS-C3560X-24P.
the issue is whenever there's a power issue on the remote site, users reports they're unable to use their wifi.
i always need to manually bounce the trunk port on the switch that's connected to WLC even though the port is up/up and wifi is back.
is this a known issue or a bug? need WLC upgrade?
anything i can set on the switch port/trunk so that i don't need to bounce the port in order to restore wifi?
sw01 uptime is 1 hour, 46 minutes
Gi0/13 up up | WLC |
interface GigabitEthernet0/13
description | WLC |
switchport trunk encapsulation dot1q
switchport mode trunk
end
sw01#sh log | i GigabitEthernet0/13
Mar 30 01:29:09 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet0/13, changed state to up
Mar 30 01:29:11 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
Mar 30 03:07:05 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User: admin logged command:interface GigabitEthernet0/13
Mar 30 03:07:12 UTC: %LINK-5-CHANGED: Interface GigabitEthernet0/13, changed state to administratively down
Mar 30 03:07:13 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to down
Mar 30 03:07:17 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet0/13, changed state to down
Mar 30 03:07:19 UTC: %LINK-3-UPDOWN: Interface GigabitEthernet0/13, changed state to up
Mar 30 03:07:21 UTC: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/13, changed state to up
sw01#sh clo
03:19:11.471 UTC Wed Mar 30 2011
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.120.0
Bootloader Version............................... 1.0.20
Field Recovery Image Version..................... 7.6.101.1
Firmware Version................................. PIC 16.0
Build Type....................................... DATA + WPS
System Name...................................... wlc01
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 172.27.207.7
Last Reset....................................... Power on reset
System Up Time................................... 0 days 1 hrs 42 mins 54 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
