About Joe Clarke

Joe Clarke · 09-28-2020

Yes. The latest 2960X images do offer EEM compat on par with 3K switches.

Joe Clarke · 06-15-2017

Getting To Know YDKNew to the concepts behind model-based management? Maybe you’ve heard of YANG, but you’re not sure how to navigate YANG modules to find what you’re looking for. Or maybe you’ve found the YANG path that will do what you want, but yo...

Joe Clarke · 03-21-2017

Last year at Cisco Live Melbourne I was tasked with building some monitoring and automation to help support the network infrastructure for the Network Operations Center (NOC). This involved, among other things, getting Prime Infrastructure installed...

Joe Clarke · 12-08-2015

There are a number of EEM use cases that call for a policy to wait for an extended amount of time before taking a particular action. For example, one might want to ensure a link is stable again before failing back to it, or ensure a steady or idle s...

Joe Clarke · 11-10-2015

I've taken a first stab at creating an Cisco Prime LAN Management Solution-like switchport unused down report using APIC-EM as the main data provider. This report produces a list of switchports that are administratively up but operationally down for...

Joe Clarke · 08-18-2021

Your applet is running out of time. EEM policies have a default maxrun of 20 seconds, which could easily be exhausted by that ping. To ensure that this whole thing will complete, even when everything fails, you likely want a maxrun of 860. But tha...

Joe Clarke · 12-14-2020

You’re missing the double quotes around the syslog pattern. Everything after the pattern keyword needs to be quoted.

Joe Clarke · 07-10-2020

Like I said in the other reply, I wouldn't do this every five minutes. But if you had to, I gave some advice. I don't understand the question about permission.

Joe Clarke · 07-10-2020

You can only run policies via "event manager run" if it uses the "none" event detector. You've now configured it to be timed, so you can't run it manually unless you add multi-event detector support. That said, I don't think this is the right solu...

Joe Clarke · 07-08-2020

Now you’re pinging 10 hosts. You need to increase maxrun. Probably best to put it to 300 now.

Member Since	‎02-20-2002 12:03 PM
Date Last Visited	‎09-20-2021 01:50 PM
Posts	22,676
Total Helpful Votes Received	15106

User Statistics

User Activity

Re: Auto disable poe for very low power devices

Getting To Know YDK

Switching From Email To Chat[Ops]

How To Introduce Large Delays In EEM Policies

Switchport Reclaim Unused Down Report

Re: EEM action cli doesn't work properly

Re: Event Manager Applet not triggering

Re: i was wondering why it will show the first ping but not the second ping

Re: i was wondering why it will show the first ping but not the second ping

Re: i was wondering why it will show the first ping but not the second ping