CISCO2811C/K9,interface Serial0/3/1:1连接的SDH专线对端端口38.238.250.142 eq 3806不通,想做打环测试看看,求大神指点下,有命令或者案例吗
谢谢
以下是配置
interface Serial0/3/0:1
ip address 192.168.169.2 255.255.255.252
!
interface Serial0/3/1:1
ip address 192.168.169.6 255.255.255.252
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
!
ip route 0.0.0.0 0.0.0.0 182.2.6.21
ip route 10.33.24.0 255.255.255.0 192.168.100.33
ip route 10.33.24.0 255.255.255.0 192.168.100.37 2
ip route 38.238.250.142 255.255.255.255 192.168.169.1
!
access-list 110 permit tcp any host 10.33.24.42 eq 4000
access-list 110 permit tcp any host 10.33.24.42 eq 3400
access-list 110 permit tcp any host 10.33.24.42 eq 3411
access-list 110 deny tcp any any
access-list 120 permit tcp any host 38.238.250.142 eq 3806
access-list 120 permit tcp any host 31.0.160.3 eq 3806
access-list 120 deny tcp any any
!
已解决! 转到解答。