Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
3979
Views
0
Helpful
9
Replies

ACI Multi-Pod configuration missing ACI 4.1

Jeremy Dubrulle
Level 1
Level 1

‎06-04-2019 07:46 AM

Hello,

 

I'm using the ACI version 4.1 and I can't find the create multi-pod menu where we used to create multi-pod in previous ACI versions.

I've uploaded a screenshot of my APIC with the menu create multi-pod missing. I could create a pod but can't create the multi-pod configuration with the dedicated menu I knew from previous releases. Can you tell me where I am wrong ?

 

Thanks,

2 people had this problem
Labels:
Preview file
119 KB
0 Helpful
9 Replies 9

Remi Astruc
Level 1
Level 1

‎06-04-2019 09:07 AM

Hello,

In the left pane, right-click "Pod Fabric Setup Policy", and select "Create Multi-Pod"...

 

Remi Astruc

0 Helpful

Jeremy Dubrulle
Level 1
Level 1
In response to Remi Astruc

‎06-05-2019 02:17 AM

No I tried that but the menu I should have is "Pod Fabric Setup Utility" I think. But it's not there.

I uploaded a picture of my Pod Fabric Setup Policy menu. You can see that I don't have this menu.

Preview file
74 KB
0 Helpful

ranraju
Cisco Employee
Cisco Employee
In response to Jeremy Dubrulle

‎06-05-2019 06:23 AM - edited ‎06-05-2019 06:23 AM

Can you try under Fabric > Inventory > Quick Start > Add Pod. 

 

Please find the screenshot attached.

 

Regards,

Ranganath

Preview file
187 KB
0 Helpful

Jeremy Dubrulle
Level 1
Level 1
In response to ranraju

‎06-05-2019 06:32 AM

I tried but the button doesn't lead anywhere, I click and nothing happens ... See my screenshot.

Anyway, I already created a pod with the Pod Fabric setup policy, but I'm looking for the create multi pod menu, as it was in 3.X, but if it has changed, I don't know what to do

Preview file
82 KB
0 Helpful

Jeremy Dubrulle
Level 1
Level 1
In response to ranraju

‎06-05-2019 08:18 AM

You're right it's this button => https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/L3-configuration/Cisco-APIC-Layer-3-Networking-Configuration-Guide-411/Cisco-APIC-Layer-3-Networking-Configuration-Guide-411_chapter_010111.html

 

But in my APIC GUI it doesn't work. I click and nothing happens ... If nobody ele has this issue, I think I should reinstall the APIC ..

0 Helpful

ranraju
Cisco Employee
Cisco Employee
In response to Jeremy Dubrulle

‎06-05-2019 06:56 PM

You should get a pop-up when you click on "Add Pod", then I would suggest you to go to the top right of the APIC GUI and under settings (under gear icon), select "Show API Inspector" (attached screen shot).  You should get a blank API inspector window. And then try to click on the Add POD on the GUI again which will generate API calls that can be seen on the API inspector window. Review those to see if you find any error/ anything suspicious. If that still doesn't help, please open a TAC case with the logs collected.

 

Regards,

Ranganath

Preview file
22 KB
0 Helpful

Jeremy Dubrulle
Level 1
Level 1
In response to ranraju

‎06-05-2019 11:54 PM - edited ‎06-05-2019 11:56 PM

I get that from the API inspector :

 

timestamp: 08:53:21 DEBUG method: GET
 
url: https://172.20.2.22/api/node/class/fabricSetupP.json?query-target-filter=wcard(fabricSetupP.dn,%22^uni/controller/setuppol/setupp-1%22) response: {"totalCount":"1","imdata":[{"fabricSetupP":{"attributes":{"annotation":"","childAction":"","configIssues":"","descr":"","dn":"uni/controller/setuppol/setupp-1","extMngdBy":"","lcOwn":"local","modTs":"2018-10-08T03:50:44.874+00:00","monPolDn":"uni/fabric/monfab-default","name":"","nameAlias":"","podId":"1","podType":"physical","status":"","tepPool":"10.1.0.0/16","uid":"0"}}}]}
timestamp: 08:53:21 DEBUG method: GET
 
url: https://172.20.2.22/api/node/class/l3extInfraNodeP.json?query-target-filter=and(wcard(l3extInfraNodeP.dn,%22pod-1%22),eq(l3extInfraNodeP.fabricExtCtrlPeering,%22yes%22)) response: {"totalCount":"2","imdata":[{"l3extInfraNodeP":{"attributes":{"annotation":"","childAction":"","descr":"","dn":"uni/tn-Generali-infra/out-multipod/lnodep-bSpine/rsnodeL3OutAtt-[topology/pod-1/node-1001]/infranodep","extMngdBy":"","fabricExtCtrlPeering":"yes","fabricExtIntersiteCtrlPeering":"no","lcOwn":"local","modTs":"2019-02-12T01:01:56.361+00:00","monPolDn":"uni/tn-common/monepg-default","name":"","nameAlias":"","spineRole":"","status":"","uid":"15374"}}},{"l3extInfraNodeP":{"attributes":{"annotation":"","childAction":"","descr":"","dn":"uni/tn-Generali-infra/out-multipod/lnodep-bSpine/rsnodeL3OutAtt-[topology/pod-1/node-1002]/infranodep","extMngdBy":"","fabricExtCtrlPeering":"yes","fabricExtIntersiteCtrlPeering":"no","lcOwn":"local","modTs":"2019-02-12T01:01:56.361+00:00","monPolDn":"uni/tn-common/monepg-default","name":"","nameAlias":"","spineRole":"","status":"","uid":"15374"}}}]}
timestamp: 08:53:21 DEBUG method: GET
 
url: https://172.20.2.22/api/node/class/l3extOut.json?query-target-filter=wcard(l3extOut.dn,%22tn-infra%22) response: {"totalCount":"0","imdata":[]}
timestamp: 08:53:21 DEBUG method: GET
 
url: https://172.20.2.22/api/node/class/fabricNode.json?query-target-filter=eq(fabricNode.role,%22spine%22) response: {"totalCount":"1","imdata":[{"fabricNode":{"attributes":{"adSt":"off","address":"10.1.240.33","annotation":"","apicType":"apic","childAction":"","delayedHeartbeat":"no","dn":"topology/pod-1/node-155","extMngdBy":"","fabricSt":"inactive","id":"155","lastStateModTs":"2019-05-27T05:57:18.462+00:00","lcOwn":"local","modTs":"2019-05-27T05:58:08.395+00:00","model":"N9K-C9336PQ","monPolDn":"uni/fabric/monfab-default","name":"spine1","nameAlias":"","nodeType":"unspecified","role":"spine","serial":"SAL1931LA4N","status":"","uid":"0","vendor":"Cisco Systems, Inc","version":""}}}]}
timestamp: 08:53:21 DEBUG method: GET
 
url: https://172.20.2.22/api/node/class/fabricPod.json?query-target-filter=eq(fabricPod.podType,%22physical%22) response: {"totalCount":"2","imdata":[{"fabricPod":{"attributes":{"childAction":"","dn":"topology/pod-1","id":"1","lcOwn":"local","modTs":"2018-10-08T03:50:44.598+00:00","monPolDn":"uni/fabric/monfab-default","podType":"physical","status":""}}},{"fabricPod":{"attributes":{"childAction":"","dn":"topology/pod-2","id":"2","lcOwn":"local","modTs":"2019-05-27T00:00:38.018+00:00","monPolDn":"uni/fabric/monfab-default","podType":"physical","status":""}}}]}
timestamp: 08:53:21 DEBUG method: GET
 
url: https://172.20.2.22/api/node/class/fvFabricExtConnP.json response: {"totalCount":"0","imdata":[]}
timestamp: 08:53:38 DEBUG method: GET
 
url: https://172.20.2.22/api/node/mo/info.json response: {"totalCount":"1","imdata":[{"topInfo":{"attributes":{"childAction":"","currentTime":"2019-06-05T21:31:34.766+00:00","dn":"info","id":"1","podId":"1","role":"controller","status":""}}}]}
0 Helpful

Jeremy Dubrulle
Level 1
Level 1
In response to Jeremy Dubrulle

‎06-06-2019 12:02 AM

Please notice that our spine isn't powered on at the moment, but it's a lab environment and I hoped I could do that (at least go with the wizard) without the spine. It had already been registered in the fabric earlier.

 

Tell me if it's mandatory to at least make the Add pod button works ..

0 Helpful

Gleylancer
Level 1
Level 1
In response to Jeremy Dubrulle

‎08-15-2019 12:39 AM

But in my APIC GUI it doesn't work. I click and nothing happens ... If nobody ele has this issue, I think I should reinstall the APIC ..

I can confirm that this is missing in our stock APIC with 4.1.2 too.

0 Helpful
Customers Also Viewed These Support Documents

Review Cisco Networking for a $25 gift card

Save 25% on Day-2 Operations Add-On License