Solved: Cisco ACI - ELAM capture

Robo123 · ‎04-23-2024

Hi All,

I am geting below alert while configuring ELAM on ACI leaf switch.Can any one suggest on this.

module-1# debug platform internal tah elam asic 0
Invalid CLI for platform type - TAH

also can some one share the procedure to perform the ELAM capture on below platform.

Model: N9K-C93216TC-FX2

Version :15.2(7g)

joezersk · ‎04-23-2024

Hello. Different leaf and spine platforms over the years come with newer ASICs with different names. For the FX2 the platform name for ELAM capture is called "roc". This link ought to help guide you for setting up ELAM capture for any platform.

https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-controller-apic/217995-troubleshoot-aci-intra-fabric-forwarding.html

May I also suggest the excellent ELAM Assistant at dcappcenter.cisco.com? It presents a nice, easy to use UI which is much better than wading through the CLI.

View solution in original post

joezersk · ‎04-23-2024

Hello. Different leaf and spine platforms over the years come with newer ASICs with different names. For the FX2 the platform name for ELAM capture is called "roc". This link ought to help guide you for setting up ELAM capture for any platform.

https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-controller-apic/217995-troubleshoot-aci-intra-fabric-forwarding.html

May I also suggest the excellent ELAM Assistant at dcappcenter.cisco.com? It presents a nice, easy to use UI which is much better than wading through the CLI.