Fault Acknowledgment per ACI Ports

[Chris77]

Hi All,

is there any chance to acknowledge faults port-wise? My intention is to acknowledge some port down Faults. As some sleeping servers are connected to those ports, removal of port config is not possible but I want to get rid of the corresponding faults.

Thanks.

BR

[Sergiu.Daniluk]

Hi @Chris77 

You can to ack only the specific faults you want, by going to the System -> Faults -> select the fault you want to ack, right click on it and select Acknowledge fault:

Then you can go back to the Faults repository, click on the hammer logo and select Hide Ack Faults:

You have this option in Dashboard as well:

Cheers,

Sergiu

[Chris77]

Thanks @Sergiu.Daniluk.

But does this means that the fault is acknowledged in general for the whole landscape or only for this specific port?

[Sergiu.Daniluk · Accepted solution]

Only the specific fault which is ack will be hidden. And since the fault refers to a specific interface in a specific EPG, only that one will be hidden. If you have the same interface in multiple EPGs, then you'll need to ack all faults.

Cheers,

Sergiu

[Chris77]

@Sergiu.Daniluk 

Thank you Sergiu.