01-02-2024 05:05 PM
Hi
Logon to leaf from apic. below is what I can see. its linux mode. How to change it into Cisco mode? Thanks
Solved! Go to Solution.
01-02-2024 06:36 PM
Hi @Leftz ,
Are you working with
If working with the Simulator, you can't get access to the leaf switches
If working with real hardware, the prompt should be more like:
apic1# ssh leaf1201 Housley Fabric#1 ACI Lab Password: Last login: Fri Dec 15 07:12:44 2023 from 172.30.90.10 Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2022, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the GNU General Public License (GPL) version 2.0 or the GNU Lesser General Public License (LGPL) Version 2.1. A copy of each such license is available at http://www.opensource.org/licenses/gpl-2.0.php and http://www.opensource.org/licenses/lgpl-2.1.php Leaf1201#
Not sure what the deal is if working with virtual hardware, but I'd suspect that the hardware debug commands like vsh
and vsh_lc
(which is the debug shell for the line card) would not work on a virtual switch
01-02-2024 06:36 PM
Hi @Leftz ,
Are you working with
If working with the Simulator, you can't get access to the leaf switches
If working with real hardware, the prompt should be more like:
apic1# ssh leaf1201 Housley Fabric#1 ACI Lab Password: Last login: Fri Dec 15 07:12:44 2023 from 172.30.90.10 Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2022, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained in this software are owned by other third parties and used and distributed under license. Certain components of this software are licensed under the GNU General Public License (GPL) version 2.0 or the GNU Lesser General Public License (LGPL) Version 2.1. A copy of each such license is available at http://www.opensource.org/licenses/gpl-2.0.php and http://www.opensource.org/licenses/lgpl-2.1.php Leaf1201#
Not sure what the deal is if working with virtual hardware, but I'd suspect that the hardware debug commands like vsh
and vsh_lc
(which is the debug shell for the line card) would not work on a virtual switch
01-03-2024 06:08 AM
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide