cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
636
Views
0
Helpful
1
Replies

ACE 4700 , track gateway , icmp probe

majaj
Level 1
Level 1

i configure the the active ace to track gateway using icmp probe

when it can't ping the gateway it decrease the priority from 120 to 70,so the standby ACE take over

but when the ping back to the first ACE it doen't increase the priority from 70 to 120 again

what to do to solve this problem?

1 Reply 1

celiocarreto
Level 1
Level 1

Please paste your config.

I configured the same and it works.

My config:

primary ACE

-----------

under context Admin:

ft group 1

peer 1

peer priority 90

associate-context TEST

inservice

under context TEST:

ft track host GATEWAY

track-host 195.1.1.1

peer track-host 195.1.1.1

probe GATEWAY-ICMP

peer probe GATEWAY-ICMP

priority 50

peer priority 50

backup ACE

----------

context Admin:

ft group 1

peer 1

priority 90

associate-context TEST

inservice

context TEST will be synchronized. Admin not!!

Hope it will help.

Review Cisco Networking for a $25 gift card