I know, Cisco ACE is a very age old product now, but one of our client is still using it and need help to configure new VIP.
Network diagram is attached for easy understanding. (RED marked is working and Blue marked in NEW)
- device is in bridged mode.
- rserver, bridge interface and server side vlan is on the same subnet. (this is already working)
- server side Vlan on the core have TWO subnets.
interface Vlan150
ip address 172.21.11.195 255.255.255.224 secondary
ip address 172.21.11.227 255.255.255.224
Issue :
- We have configured rserver from "secondary" but VIP is not pinging from client end and not even from ACE itself. I think it needs additional bvi interface from the same range (secondary).
It would be great if someone help here.
Thanks,