ACE 4710 - Gracefully Shutting Down a Server

[ian.richards]

Hi,

Recently I had to stop an RServer to allow for software upgrades. I entered a no inservice command in the rserver config and all the connections on the serverfarm disappeared. I thought the no inservice should allow existing connections to finish. Is there another way of taking a server out of service?

We are running on an ACE 4710 version A3(2.5). We offload SSL on the ACE and use sticky connections using cookie insert

Thanks for your help

[ciscocsoc]

Hi,

To gracefully shutdown use the "no inservice" on the rserver within the serverfarm rather than on the rserver definition.

HTH

Cathy

[ian.richards]

thanks Cathy,

I'll try this next time

Ian