cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1127
Views
0
Helpful
2
Replies

ACE, VIP and OSPF

Branimir Turk
Level 1
Level 1

HI,

Is there any way to bound state of VIP interface with OSPF on ACE module. For example i want to advertise in ospf network on which VIP reside only if VIP is active.

Is that possible? And if yes, how?

1 Accepted Solution

Accepted Solutions

The route health-injection feature gives the ACE the ability to advertise host routes to

the MSFC acting as the upstream router. These routes can then be propagated

throughout the enterprise using any available routing protocol.

for more details

http://cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/configuration/slb/guide/classlb.html#wp1069820

Syed

View solution in original post

2 Replies 2

The route health-injection feature gives the ACE the ability to advertise host routes to

the MSFC acting as the upstream router. These routes can then be propagated

throughout the enterprise using any available routing protocol.

for more details

http://cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A1/configuration/slb/guide/classlb.html#wp1069820

Syed

Hi,

Tnx for the info.It is very helpful

Review Cisco Networking for a $25 gift card