Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Just commisioned waas express for one of our sites recently and having issues with mainframe LPR printing. When the branch prints a 300 page report it stops halfway mark. Did anyone encounter this issue? It happens in all printer models but only w...
I have two site with connected through GRE Tunnel. One end is ASR1000 and the other end is 7609. And, I have WAE674 on each ends. I also have a WAE as central manager to manage two WAEs. I'm trying to figure out how to setup routers.Can I put "ip...
configured two reservers on ACEs,but need to create a serverfarm ,where all the traffic goes to only one rserver1,when this rserver1 fails completely or not in service the traffic need to be hitting rserver2. how can I configure on ACEs ,on CSS I kno...
Hi:What is the equivalent of "replicate CSRP connections" for ACE?CSM CONFIG:vserver TEXT virtual 10.10.10.1010 any vlan 88 serverfarm TEXT replicate csrp connection------------------------>>>>>> persistent rebalance inserviceThanks
Hi ThereI have an interesting situation that I am trying to solve. I have 4 websites, each one with SSL Off-Loading on the ACE on the outside. All FOUR websites run on a single server on the inside, but each website is using a different port number f...
Hi,In the datasheet of the WAE-674-K9 says that it supports (4-port network interface card (NIC) for inline Cisco WAAS deployment), but don't mention the HWIC-4ESW anywhere. Is it supported?Any help is much appreciated!
This may sound like a silly question but can I configure the rservers and the vip address on the same network? If so does anyone have a example config?NAT, policy, etc
Hello,I have a failed ACE appliance that is part of a redundant pair at a remote location, will the config sync after I have the replacement connected? Is there any preliminary config that should be accomplished(mgmt IP, etc.)?Thanks,Dave
We run 2 CSS's here, one is prod and one is QA. Our QA is a CSS11503 and currently terminates 36 inbound SSL url's and redirects them to a backend web server..All is working well.But I am trying to add a new ssl rule and I'm having problems getting i...
Anyone out there have an implementation where you've leveraging the WAE with AutoDesk Civil3D?Running into some slowness issues with this software where it takes 5-10 minutes to load up a project and then 5 minutes to save it. I've got an e-mail out...
The default "package" on buying a WAVE-574 is with one 500G HDD only. While the disk drive setting is in RAID-1 by default, should an extra HDD be added to the WAVE-574 to fulfill the RAID-1 requirement, or should I need to get rid of RAID-1 if there...
I wanted to find out how many times can I apply a healthcheck in a single context. I have 50 farms that are using the same port and instead of creating 50 different healthchecks, I want to just create 1 healthcheck for the 50 farms and apply it to ea...
Hi all,I have a application where I have to redirect a specific URL to another. The point is that the primary URL, have some information that I want to preserv after redirection, for example:Primary URL: http://abc.com/foo/foo2Redirected URL: http://...
