Application Networking

Load balancer configuration.

Dear All,Kindly check the below mentined configuration and let me know configuration is ok or not. as i m having limited knowledge of ACE 4710. Also i have attached diagram of physical connectivity.Aslo let me know if i want to add 2 more application...

syslog and snmp posibilities with multiple contexts

Hi,Is it possible to have different contexts log through the Admin context and use the syslog servers defined here?Furthermore, is it possible to poll a context via SNMP on the VIP or can a context only be monitored on the local vlan interface.We hav...

Best stick option for End-to-End SSL

All,We have some end-to-end SSL VIP's on a 4710 box and currently using cookie insert as the stick mechanism. This stick method was chosen because mainly of our clients are behind proxy servers and therefore stick based on source-ip is not an option...

Resolved! Cisco ACE 4710 TCP Normalization

I've run into so many issues with the ACE affecting TCP traffic - ie not allowing larger window files, disconnecting FTP sessions, etc. Is there a wayto disable normalization all together and make the ACE act like a router that load balances? If so...

Question about service policy- ACE

I was under the impression that service policies had to be applied to an interface and that each interface couldhave only one service poicy. But i found the following config in our ACEservice-policy input CUSTOMER-OUTBOUND-POLICYservice-policy input ...

Nat the source IP in ACE

Hi.I am slowly migrating environments from CSS to ACE.We use a shared sorry server across environments, to get it to work on CSS, we create a group and 'add destination service' to nat the source ip of the user to that specified in the group ip.I hav...

Ace - Proxy Load Balancing with stickyness

Good moring all,We try to do some Lb for our Proxy service but we can't manage to have a good load share on both device, we end up with one proxy takin 95% of the load, the other one nearly none.We have more or less 30-40 source client proxies.we are...

Resolved! ACE Context Deactivation

Hello Netpros,I am migrating off of an ACE-20 module (running A2(1.6a)) with admin and three contexts in favor of another load balancing platform. (I need IPv6 now and Cisco isn't delivering it.)So I want to shut down all of the load balancing VIPs i...

CSS multiple websites on same IP address

Hi All,Is it possible to configure CSS 11500 to load balance individual Websites on the same service IP address.I have configured websites in IIS with Host Headers and same IP address.I want to configure CSS so that it can load balance individual web...

Resolved! URL Redirection/Rewriting in ACE 4710

Hello Experts,How can i redirect/rewrite an application url in ACE? I searched all the threads but didnt get what I want.My requirement is,If my company's DC will go down, the DR will come up and the application traffic will be redirected to DR (that...

Resolved! load balacing FWLB using ACE

Hi Gents,Can somebody help me in deciding which predictor method other then hash based source (or) destination based load-balancing when using FWLB?Will it be possible to use least-connections or least-loaded predictor methods or even round-robin p...

Resolved! Arrowpoint cookie path pointing towards double cookie problem

We are having some website http://www.abcd.com which lands to some 4 servers p05/p06/p07/p08. After then in the same page there are links like http://www.abc.com/xyz/pdfebill on which when we click the webpage should go to the servers p09/p10/p11/p12...

Resolved! WAE-7341-K9 wrong code type have ACNS need WAAS

Hello,We ordered two WAE-7341-K9 devices with application acceleration code but received content engine code. Is it possible to just install the oe7341-4.1.7.11 code or do we need to send them back to the vendor and get new devices with the correct ...

Resolved! SSL traffic Redirects

How do I configure traffic coming into a 443 rule to be redirected to another site. I want all my https traffic to be redirected to a maintenance page. I'm not terminating ssl on the CSS but i do have a cert loaded on the server

Resolved! wafs edge service dies

Hi all,ws have this alarm on waascceAlarmMajorRaised- Raise-Alarm: nodemgr: The wafs_edge service died. Can some one explain me what this aalrm is about and what i need to check on waasthanksmahesh

Application Networking

Forum Posts

Load balancer configuration.

syslog and snmp posibilities with multiple contexts

Best stick option for End-to-End SSL

Resolved! Cisco ACE 4710 TCP Normalization

Question about service policy- ACE

Nat the source IP in ACE

Ace - Proxy Load Balancing with stickyness

Resolved! ACE Context Deactivation

CSS multiple websites on same IP address

Resolved! URL Redirection/Rewriting in ACE 4710

Resolved! load balacing FWLB using ACE

Resolved! Arrowpoint cookie path pointing towards double cookie problem

Resolved! WAE-7341-K9 wrong code type have ACNS need WAAS

Resolved! SSL traffic Redirects

Resolved! wafs edge service dies

VxLAN EVPN Multisite behavior for extended Vlans

DNAC node clusters on different subnets

WAE choses wrong loopback when building its IGP.

software-defined networks and software-defined data centers

Sustainability Survey - Survey Close

ACE module configuring NTP

cisco prime server

WAAS TCP Resets

SDN via API

Cisco data center courses