Application Networking

Hi All, I am seeing a lot of traffic hitting the secondary ACE module. ACE-Sec/C1# sh ft group status FT Group : 3Configured Status : in-serviceMaintenance mode : MAINT_MODE_OFFMy State : FSM_FT_STATE_STANDBY_HOTPeer State : FSM_FT_STATE_ACTIVEPeer I...

Hi , I am unable to access the webpage of WAAS CM, access to device via SSH is working fine. Webpage is throwing below error ,  and alarm for disk00 failure. We are running WAAS CM in virtual environment ((oe-vwaas-esx  5.3.5c) Not sure if hard disk ...

Is anyone aware if the ACE's support the use of Extended Validation (EV) certificates? Thanks.

Hi, I have downloaded the the evaluation package of  LAN_BASE_SERVICES_PKG product name N56-BAS1K9-EVAL. But when i installing the same in nexus 5672, it's giving error the invalid/corrupted file. below is the output. Matix_Core_SW2# sh license usa...

Hello everybody,      We are currently implementing a TACACS+ server on our network. All our devices had local users until this point. We encountered no problem configuring the AAA setups on most of our devices, but our ACEs have had an odd behavior...

Hi please can you give some advise this app is run from excel to sql backend probe http BPCCluster  interval 2  faildetect 2  passdetect interval 2  passdetect count 2  expect status 200 200 serverfarm host BPCCluster_SF  predictor leastconns  probe...

Hi, We have an ACE pair configured in bridged mode. Is ther a way to configure them NOT to proxy external connections to the databases behind them? The DBs in question are not being load balanced by the ACE. Thanks, Jose

I have 2 almost identical infrastructures in different data centres. In one, for a particular application I have HTTP and HTTPS connections allowed to the web server. On this site sitcky cookie sessions are working OK. In the other DC for the same ap...

Hi!,I'm trying to register a Waas Express router with Central Manager following this guide http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v431/configuration/guide/cnfg/other.html#wp1062469 when i  run the command to register with th...

Hello, I have read about the ITD and didn't understand something about the L4 load balancing use-case. Cisco notes that if you deploy L4 load balance with ITD, the backend server must be configured with the VIP on a loopback interface (AKA. DSR or L...

i have a problem and not found any information. i search support sites, generally wae problem raid problem etc. disk01 or disk00 corrupted problem. my wae have just one disk and problem was there my opinion. when i use cms command fail. WAAS(config)...

Hello, We just purchased 2 Nexus9375PX switches and would like to deploy them in a spine and leaf configuration.  The issue is that we are multiple vendor environment and we like our Juniper QFX5100 to be the "spine" and the Nexus9375PX switches to b...