Application Networking

I have a problem with Citrix dropping connections when going through the CSS. I am just doing a L3 content and the CAG is handling all the SSL.I have set the flow-timeouts and verified that flows are NOT timing out with a show flows.I have enabled tc...

I am trying to get some information on the CSS11503�s compatibility with CSS11501.We have two 11501 devices and like the way they work in our failover scheme.Can the 11503 successfully create an APP session with the 11501?Is there an encryption mod...

GreetingI have some experience in CSS11500 but, I have no knowledge on microsoft load balancing service.now I would like to understand what benefit on both technoledge? specially for a microsoft application, such as sharepoint. Any comments will be a...

Hi,In the command show serverfarm :CH01AC03/P-115-A# sh serverfarm NCL_FARM_PROD serverfarm : NCL_FARM_PROD, type: HOST total rservers : 6 --------------------------------- ----------connections-----...

Hi , Users are getting disconnected in all real servers when exceeds 1000 users

Greetings,I have a situation where we need a destination nat to happen on ACE for an outbound flow that is redirected into SSLM modules, then coming back to the ACE and forwarded outward. There is a requirement to keep the SSLM module redirection so...

can cisco waas do proxy file sharing

Hosting Solution Software 1.9 does not support Catalyst 6500 devices that simultaneously run Cisco IOSSLB and contain Content Switching Modules. To effectively manage the device, move the IOS SLBconfiguration files to the Content Switching Module car...

I have been asked about providing this as a way to secure RDP connections - has anyone done this? I can see two potential ways, but do not know much about RDP.How is the SSL part of RDP initialised? would it be prractical to terminate the SSL on the ...

Has anyone experienced issues with Opentext DM (document management) or downloading files across the WAN and those files will not complete if they are large in size.

Hi,Are there any generel recommendations on how many class-maps a multi-match policy should contain? In this particular case, my multi-match policy will contain some 60+ class'es, as each customer has somewhere between 3 and 5 public ip's and traffic...

I have a NME-WAE-502 in a 2800 router. The NME is running WAAS software 4.0.13 (build b23 Sep 25 2007). All the other WAE appliances and CM are running 4.1.1c build 16.Is it a problem when CM is 4.1.1.c while NME is 4.0.13?I like to upgrade the NME t...

hi,i've 4 virtual context in my ACE configuration.it's possible to use the same real server in multiple context?2 context are configurated in one-arm mode and 2 in bridge mode.tks all Aghibear