Application Networking

Hello guys,I'm planning to install 2 redundant load-balancers in a DMZ zone. The CSS units to be installed behind 2 ASA firewalls working in Active/Standby mode. What are the recommendations for these requirements?1-Do we use the box-to-box redundanc...

Helo all, I wanted to know what happens to the MAC addresses of the failover interfaces on the two CSS devices configured as a failover pair when a failover occurs?Also what happens in a failover event in general? Can anyone point me to some document...

want to know Wan optimization

hi guys!am upgrading waas 4.0.19 to 4.1.1.are the licenses (enterprise, transport and cm) affected? or i have to reload them again on the upgraded devices?thanks

Has anyone deployed an ASR for WCCP redirection? How stable is this platform?Thanks,DG

I m not able to access the GUI of GSS whereas i can ssh. Here is the show run output from GSSIs there any way to troubleshooting the issue.abc#sh runinterface ethernet 0 ip address zz.zz.zz.zz 255.255.255.128 gss-communicationsinterface ethernet 1 ip...

Hi All, when I turn on WAAS client on the windows Vista, the network connection is disconnected but it works with XP like a charm. any suggestion would be very appreciated. Alex

I have a customer who need to test the ACE4710 on his network with the following scenario:to web servers holding 2 applications using ports 7001Appl1 on server1 to be load balanced with App1 on server2 and the same for appl2. both servers resides on ...

Hi,Is there anybody who can explain the advantage of in-band health checking? What is the benefit of using this checks when its is still neccesary to use the normal probes? Only reading the ciso pdf gives me not enough information to understand this ...

Dear all,we would like to monitor several ressource usages on our ACE module,but didn't have much luck so far. In particular we want to have MRTG graphs for :* CPU usageIn MRTG we tried "Target[lb-admin-cpu]: 1.3.6.1.4.1.9.9.109.1.1.1.1.7&1.3.6.1.4.1...

Hello,the ace is putting out following error message on several contexts if you try to ping something:Maximum ping sessions in progress....retry later. The session Table of the context is nearly empty just 4 current ICMP connections.The resource usag...