Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI have asked this question before, but as I have not get far with it I am going to try to be more specific this time.I have a server that needs to do an outbound connection to a mail server. The connection has to be initiated to port 26, that then ...
i am looking for a solution for load balancing between 2-3 servers in the same datacenter. i saw the ACE 4710 but that seems expensive compared to the rest of the the cisco gear in that datacenter. anybody knows what would be an entry level load bala...
I have a 2 arm deployment on a WAE-7371 with inline deployment at the core. Both WAN routers are connecting to the same MPLS cloud. I found out when the traffic going out via the L0/W0 & return via the same int inlinegroup then it's fine. But if the ...
I get the following error message then i try to configure sticky on an ACE:Error: sticky resource not availableWhat is the problem ?I have release "c6ace-t1k9-mz.A2_1_2.bin" and sticky should be supported. ace-10/RGW_Front_servers(config)# sticky ip-...
we have a 7206 with Distributed Director configured.The Windows AD is pointing to the 7206 for certain servers that need to be redirected in the event of the primary failure.Suddenly this has stopped working, the 7206 is not returning name requests.E...
I have CNR running on GSS appliance and Mcdshadow creates several backup directories of files on GSS. I like to no if there is an easy or automated method of getting multiple directory of files off of GSS.
Hi, I have changed admin password with GUI interface and since I can't login to my ACE as admin. Same issue with SSH, I didn't found any information about the password recovery for a 4710 appliance.Regards
DearI have a probe DNS , but by someone reason, in spite that the service DNS is up, the probe show that down. I tried putting domain and expect, but the results are the same. The process is the next:a) First time detect service up.b) Service is down...
Hi,I need to know if for 2 ACE to work on FT the subnet needs to be same or can it work on different subnet as well?Is it possible to connect 2 6509 with ACE each, connected through routes, not with vlans (layer 3, not layer 2)??Also, can both ACE be...
I have a situation where clients and server could be in the same subnet, AND/OR client and server could be in different subnets, kind of mixed mode environment. My question, can ACE be configured as both Routed and Bridge mode at the same time, if ye...
Hi, I am able to authenticate to my ACE modules via Radius, but when I login it does not give my Admin rights. Does anyone have a fix for this? My ACS admin has been working with TAC since last week to no avail.John...
