Application Networking

Hello!!Plese help me with this cuestion about CSM connection modes:We have 2 Cat6500 with a CSM inside of each (CSM1 on Cat6500_1 and CSM2 on Cat6500-2)The CSM1 is on bridge mode with Vlan31 for Client side and Vlan131 for Server side.The CSM2 is on ...

I'm trying to upgrade my field WAE devices, from a software image on my WAE MC (WAE-512). The image is 4.1.1c, this was fine until I upgraded the MC to 4.1.1c, and now every attempt from the GUI or CLI (FTP COPY INSTALL command) fails. Both state the...

When I look ar the "avg local response times' in the above table, i see the times are a lot greater than the 'avg remote response times" and % time saved is 0? why is this, could it be outlook 2007 encrypted clients?

HI All,we are getting ready to do a POC with ACE, Hurray !!!!!!!!!One problem though. The customer (who is a service provider) is going to loadbalance traffic to a web proxy, but wants to bypass IPSec VPN traffic from getting loadbalanced to proxies....

Hi all,may you help me to understand those commands: content foo add service bar01_11111 add service bar02_11111 balance aca protocol tcp port 11111 vip address 10.0.0.1 active group foo_group vip address 10.0.0.1 add destination service bar01_11111 ...

We are in the middle of a demo on version 4.1.1b. Browsing and opening files is very fast, however when saving a file, especially in MS Word, it takes much longer than expected. It is taking 4 to 5 seconds to open the file (application and all), but ...

Hi,How to configure the ACE to redirect a https request to different url.For exampleClients requesting https://www.mycompany.com shall be redirected to https://www1.mycompany.com.Please let me know.Thanks in Advance

Hello,Is it possible to configure a VIP address that is different from the VLAN subnet where it is applied on?Fe: VIP is 10.10.10.1/24 on VLAN 10Interface of ACE in VLAN 10 is 192.168.1.1/24On the upstream routers, a static route points to the VIP ad...

Is it possible to influence on a delay between ACE sending FIN for tcp probe and expecting FIN-ACK from real server (default 1 second). Customer don't want to use RST Sometimes happens that server is not responding in time.Thanks in advance.Regards,B...

Client TCPrt : 80 -----------------------------> CSS VIP to the actual server on TCP port 5555 --------------> Server The requirement is that client will send a request to VIP on port 80 and VIP has to forward the request to server on a different por...

Hi,I need some configuration to provide site stickiness with the Help of ACE running in two different sites.DNS functionality is handovered to the GSS For exampleOnce a DNS A record is given back to the user for www.company.com and the request is mad...

Hi how can I get the what is the cache lifetime set for SSL sessions in the CSS with SSL module?cp

Hi all, I would like to write custom TCL script in ACE. I would like to write some info for debugging to the console with "puts $VAR ", but nothing is shown. What could be the problem ? I have debug hm all on.Regards, szicsu

Hi all,I have an SCE solution running to provide packages and limits to internet consumption. I generated the "top P2P consumer" chart, it shows that consumers reached some volume above 50 Gig. The problem is that chart title says it's for only one d...