Application Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

Looking at purchasing/deploying 2811 WAAS routers on the WAN. It appears that a dedicated WAE in manager mode would be needed if management is desired. Is the management WAE really necessary. Configuration can be completely done via the CLI, at least...

I am not able to access the web server throught the vip. Your help will be greatly appreciated. Below is my configuration on the ACE. Server:---------resource-class RS_web limit-resource all minimum 10.00 maximum unlimitedboot system image:c4710ace-...

I have JUST started using the ACE blade and have upgraded to c6ace-t1k9-mz.A2_1_1a.bin. I have configured access to the device via ssh, http, https, etc... When I access the server via http/https, I only get a generic web page telling me the version...

mcroberts by Level 1
  • 559 Views
  • 3 replies
  • 0 Helpful votes

Hello,We have the ACE module version:build 3.0(0)A2(1.2)I was wondering what could be the cause, when taking a capture in the ACE, to see some bad TCP cksum. It seems so far, that only when taking a capture from the ACE that we can see that, and not ...

dan_voyer by Level 1
  • 1900 Views
  • 1 replies
  • 0 Helpful votes

Hello,I wonder how CSS calculate the server load. There is a way to limit the throughput of a server but it has to be expressed by a number between 0 and 254. Not so clear what to choose!Thank you for your explanations.David

Hi!I have two GSSs: GSSA on siteA and GSSB on site B. The GSSs are ANS for a certain domain. There is a INS (intermidiate name server) that has two entries (one for each GSS), if GSSA fails then the INS will use the GSSB.My question is: Is it possibl...