Application Networking

HelloWe are trying to separate the traffic flowing through the CSM module and being SSL-offloaded by SSLM modules. We have already decided that the best way to do that is to use the CSM in bridge mode and SSLM with the new, vrf aware software. Unfor...

I know that this topic has been breached many times, I just want some design validation.The need is to load balance servers in a DMZ with an existing CSS that load balances internal servers. It is cost prohibitive to purchase a new set of 11501s ded...

Hi, I'm trying to determine if it's posible to write a script that will retrieve an html page, return some user credentials (login) to the server, and upon successful authentication, download a small text file. The service will be declared active if ...

We have a pair of CSM 4.1.6 in bridge mode and we have a VIP for passive ftp set. We are seeing consistent errors with FTP port 1985. We took several captures and notice that conns show ESTAB on CSM but the client sends the SYN receives the SYNACK th...

Hi,Can we integrate print services into Windows AD, so when a user wants to select a printer to install it can be be found in AD, rather then having to map the edge WAE from the desktop?Thanks,Vip

Hi,I wan to cofigure my CSS to advertise VIP addresses through ospf. Everything is fine untill I want to use SSL termination on these VIP addresses. This is because the contents for SSL terminations ares always in "Alive" state. They dont observe th...

I have dot1q enabled 7507 connecting frame relay branch to data centre.Core WAAS sits on a VLAN subinterface.As soon as I enable "ip wcccp redirect 61 in" on VLAN trunked interface, I am loosing connection to the branch.the config is here..interface ...

Hi,I ordered an extra disk for a 512 with a single disk installed. Is there a procedure for installing the new disk and getting the Raid 1 built or can I power the WAE down install the disk power it on and watch it build the Raid?Thanks,Mike

It is relatively simple question but I can't find the answer in documentation or forum. Is it possible to have 2 rservers, both in different IP segments (different IP networks) and still use it in one serverfarm? and loadbalance its traffic with comm...

Hi,I am facing a problem configuring FTP servers behind CSS 11501 and I would apreciate your help.The FTP service needs a GROUP, with the same VIP address as the CONTENT rule, configuration to work correctly. The problem is that I have already config...

i have a question in the positioning of the WAE device in integrating with our network (I will be using the InlineGroup not the WCCP). we have a 6513 for both HQ and Branch that serves as our router and LAN switch. My question is: If I will be integr...