Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello, we are going through design possibilities for a WAN technology refresh and have come up against a combination which doesn't seem to work. Not sure if it's a bug, or we're doing it wrong or it's just simply not supported. There doesn't seem to ...
Is there a way to perform RADIUS connectivity and optionally basic auth testing, without a client?I see the "test wlan dot1x radius" command in the CLI which looks promising, but I can't find any info on it. The "test ..." commands aren't in the Com...
Running LMS v3.2 on Win2k3 w/ACS v4.2Have noticed LMS has started behaving strangely. Everything seems OK except when navigating to CS.When clicking onto the CS tab some of the CS applets never seem to finish loading.Also it looks like the tomcat pro...
What exactly is the difference between PKC and OKC?Seems to be a lot of confusion out there. What are the cold hard facts?The WLC FAQ says "PKC is a feature enabled in Cisco 2006/410x/440x ..."The Debug Guide says "The WLC only supports OKC..."...
Trying to get to the bottom of why some DFM alerts show the alerting device as an IP address instead of the name.From what I can see the devices that do this are not listed in DFM Known Devices even though the Object Finder applet and Device Center ...
OK, a bright colleague has this idea.Configure L2 Security MAC Filtering via RADIUSThe RADIUS server keeps a simple table of unique macaddr requests for the day. For each request:if macaddr not found insert macaddr send radius accept with attr...
hi, ressurecting an old un-answered post here as this is exactly the feature I'm looking for.The ability to limit assoc time per client on an un-authenticated public service.Is it possible on the WLC? Or is it in Guest NAC or something else?Thanks i...
You may get more detail by enabling debug logging for Contract Connection.RME > Admin > System Preferences > Application Log Level SettingsSet ContractConnection to DebugRetry then check the log at NMSROOT\log\contractcon.log...don't forget to turn o...
Geert, I forgot to give basic info of which version and it is 3.2 so I will look into getting SP1 applied. Thankyou!Just so I'm clear on this...I presume you meant the "sh environment temperature" command.In the above command's cli output should the...
