We have two 11503's each with an SSL module, in a redundant VIP configuration. Can we load the same certificate on both CSS's? Or must we obtain a separate certificate?Thanks!
Hi All,I have a scenario where external users can access an URL called http://www.sm.com but at the same time, they cannot access http://www.sm.com/adminInternal users can access any URL.I am thinking of assigning 2 different VIPs and not open firewa...
Hello All, We have some FE-511 appliances and we want to knowif it's possible to install WAAS 4.0 on them, with same results as if they were WAEs (say,512 or 612).Are there any limitations to keep under consideration?The actual version running on the...
Good Day, I am soon going to implement CSS 11503's in redundancy with session stickiness. Request the experts review on the configuration. The config with a diagram is enclosed in the attached document.Many Thanks,gagan sethi
I am trying to configure load balancing for a client who has a more complicated traffic flow than normal and I am trying to determine the best method to configure the CSS to control the load.The traffic flow works as followsThey have 2 web servers. T...
I have a CSS with the config shown below.We have two servers configured for failover to DR and we are going to add a mail server as well.As a box to box failover to DR, it is working great, if the primary server is down, the CSS redirects web request...
Hello Guys , I need one urgent help for SSL performance . My customer is using CSS11501 and one of its services is giving problem . When one Pc is trying to browse a URL , System gives an errormsg "CANNOT CONNECT TO THE CITRIX METAFRAME SERVER . THE...
I am in the process of testing WAAS with WCCP. I have a 7206VXR at the core, where a cluster of WAE's will live.In my remote offices, I have a range of 2800's, 3700's, and 2620's (non XM). From other posts, I have seen where the minimum recommended...
I have a sceanrio where I need to redirect to https from http. For example, if customers enterhttp://www.sm.com should be redirected to https://www.sm.comhttp://www.sm.com/portal -> https://www.sm.com/portalThe first redirect works fine. But the se...
Hello,I am trying to configure my new ACE blade with a test. I've created two VIPs and they are active. But when I try to telnet to the VIP IP and port it fails. I do get this message in my syslog:Jun 1 08:08:49 10.7.1.250 Jun 1 2007 08:08:49 : ...
All,I have configured an ACE with some contexts. I think I have configured it according to the documentation.If I switch to a different context using the changeto command, I switch to the context, but get the following error message:NOTE: Configurati...
Hi,I need to know what happens when I suspend a group or a content rule (to modify it, ie: remove or add a service):1. Does it affect existing flows making use of this group/content rule ?2. Does it only affect new connections ?3. In a ASR redundancy...
I have a CSS managing a nunch of network ports for keepalives. Cisco is suggestiong that I upgrade to their CSM product. Can anyone give me a comparision of the products and do ya'll see any reason to do this? Can anyone explain the differences to me...
Hi everyone,I have the question about redundancy configuration of multiple WAEs.I understand redundancy and load balancing of multiple WAEs can be achieved by WCCPv2 function (service group), and necessary commands on the router(s) are;ip wccp 61 gro...
