Hi,I am trying to implement CSM configuration via the XML interface. Have you ever experienced a situation where the CSM 'reload' after handling a Post? Can a badly coded network-management script kill the CSM?
we have an inter-vlan network with the L3 switch on the core and a couple of at&t routers on the edge. According to the cisco wae implementation doc, they only go over the wae design, where the core switch is a layer 2 switch. Should we take the same...
Hello,I would like to know if any one has tried out running Cisco's WAAS/WAFS/WAE or Squid proxy as a cache cluster to leverage load balancing support in WCCPv2.I am trying to understand WCCP based transparent network redirection in a lab setup using...
Hello everyone!We are building a content delivery network and are using Multicast extensively. My question is for those experts who have worked with Windows Media Multicast in a Cisco Multicast environment over the Internet. Yes, our provider is ru...
To NAT outgoing flows out of two servers, is it necessary to define a content rule and source group (or is just a source group sufficient?).Having trouble with Option 2. Option 1:service svr1ip address 192.168.10.1no portprotocol tcpactiveAlso does C...
We have a CSS11503 (no SSL module), and are using stickiness rule for ssl-id, as:....balance roundrobinadvanced-balance sslapplication ssl.... etc.What subsystem logging will show the SSL-Id for connections. (We seem to get pinned to the same server...
Hi there...I have implemented an 11501 w/SSLM in our environment, and when the app teams are doing their testing, they are telling me thet the performance and speed is degraded when they are testing against the VIP versus against the actual backend h...
All,I need to purchase and apply a wildcard cert to our CSS. The requirement is that the wildcard cert cover multiple sub-domains.For example... wildcard cert "*.web.com" needs to cover the following sub-domains...pets.web.comcats.pets.web.comdogs.pe...
Hi,We are testing the solution WAFS(4.0.9.b.10) by Cisco with a CM, edge and core devices(WAE-612-K9) in WCCP Mode (latence 100ms, line 2Mb/s). We open in remote a 10Mo Word document shared(with Word 2002 SP3), we save it after modification. During s...
I am currently working on implementing NTLM authentication using a Cisco Cache Engine 560 within our organization. In addition to this stand alone caching device, I am also utilizing SmartFilter for URL filtering policies. I have been successful in...
Hello, I've been trying for two days to understand how no to NAT server initiated flows.The IPERF servers always sees the VIP as source address. I would like to see the real server's IP as source address.I don't see what wrong in my config.Here's wh...
