Hi,I'm looking for one example of complete configuration (router and Content Engine), because I can't know where I must connect my private network (user side) and public network (Internet side).Thanks for your Help !Abdellah
Hi there,Recently I have deployed WAAS for just one site, and I am a bit concerned as majority of the traffic falls into "Other Traffic" category. I've discovered this is just a file transfer between XP desktops and a W2003 server. Why it's categoriz...
Hello, I am trying to write a TCL script on a CSM (Code Ver 4.1) that retains the value of a variable between probe instances (so I can increment and check a variable in each probe attempt). Looking at the documentation there is supposed to be a 'gs...
Hi,We are looking for some solution to loadbalance BO servers.How reliable is DFP protocol(Dynamic Feedback protocol)?Does ACE(Application control engine) support DFP.Thanks in AdvanceAniruddha
Hi,I am trying to make a script to do health check against a web page on port other than 80. When I run my script:script play ap-kal-http-port "10.60.27.27 30200 /ebss-aml-web/HealthCheck"I got:Error in script playback line:38>>>socket waitfor ${SOCK...
Could anyone advice me how do: - "configure to use active cookie persistence (cookie insert)" - "configure to insert the cookis "xxx" into header"my current configure isservice server1 ip address 10.1.1.10 protocol tcp port 80 keepalive type tcp ...
Hi, Is there any way to make the ACNS to allow msn messenger to connect through it.For a reason a blocked the default port for MSN (1863) to force it to use the port 80 so the traffic is directed to ACNS over WCCP as it is WEB traffic. It's directed ...
The Configuration guide mentions -VPN is to be deployed after WCCP interception and that WAAS device should see only unencrypted traffic.But it also states that the device provides limited TCP optimization to encrypted traffic.How useful would a WAE ...
Hi, Does someone knows if exist a problem o consideration to take care with the installation of the SP2 (Win 2003 Server) in a LMS2.5 Server?Actually the server has Win 2003 Server w/SP1.Thanks
Hi all,I have a query on whether the following is possible or not, and how we should approach this.What we currently have is CSM client VLAN 100, with PBR setting the next-hop of matching back-end reply traffic to 10.10.100.1, eg: vlan 100 client ip...
Encountered a new phenomenon with the ace module and ssl termination.Four separate contexts, one admin and three server farm contexts. All three server farms terminate ssl on the ace front side.First of all everything worked like configured. But afte...
Hi all,a customer need to deploy a wan architecture, with some wae running waas, as wasf feature.Really, we have an HQ with some core-wae, and approximately 30 branches with edge-wae. Other this, we have aproximately 40 small brach, without edge-wae,...
hello all !i have some cisco devices ( PIX515 , 2611 and 1711) in these devices i have activated logging. now i need to configure e logging server to collect all these log'sCan someone advice me about a software to collect these log's, also is any f...
Hi,Is it possible that CSM has two client side vlans? The reason why i need to configure 2 client-side vlans is the ip address of the first client-side vlan is running out.Thanks.J.W.
Hi,The network topology is :user's pc---Cisco3600---CSM-S---FWSM---ServerUser needs to access server's real IP. How to configure the CSM-S? I tried the configuration below but failed to ping the server from user's pc.I configured a static route on se...
