Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to set up a profile that will allow our monitoring group to place rules and services on an Active or Suspend status.All that I have read, points to a dir-access with customized priviliges based on mask or super-user.What will be the "code" und...
Greetings, I am very new to the CSS and I'm hoping for a little basic guidance. Here is what I have so far:A pair of 11503's that I hope to setup in failover mode. I have a pair of Gig fiber ports in each unit.The immediate need is to get redundancy ...
This is probably basic, but how satisfactory is this http load balancing method:service http-1 ip address 192.168.1.10 protocol tcp port 80 keepalive type tcp active service http-2 ip address 192.168.1.9 protocol tcp port 80 keepalive type tcp active...
i'm looking at doing a etherchannel/channel group to CSS 11506 for greater bandwidth on the front of the CSS.. clinets>chan-group>vip>CSS >servers. has anyone else done this? reason i ask if this can be done is that the backup (ASR) CSS vir-peer show...
I want to understand how the balance works for http/https in the CSS. As per doc,- http/1.0=single URL per TCP connection- http/1.1=persistent connection.Q1. my understanding is http is stateless connection so needs TCP session for each URL. how the ...
Hello, can you explain why I am unable to get a vserver with a virtual address of 0.0.0.0 pointing to a serverfarmwith predictor forward to become operational?The configuration I have is as follows:vlan 100 clientip address 192.168.0.20 255.255.255.2...
Hi,I got a quite intressting problem to solve:Is there a way to rewrite the HTTP-header depending on the choosen service/real?This means:A client requests www.foo.com. The CSS decides that server1 is the one to serve the request. The problem is, that...
Hi,I've some questions in regards of Direct Server Return.1) Is Dorect server Reutrn supported on the CSS. I've not found any inforamtion sin regards of this so far.2) In case on configures direct server return on a CSM is ther an IP-Tunnel between t...
All,Can anyone point me to some basic NAT setup information?I have a pair of 11501 CSS boxes running in ASR failover mode. All is well on this front.All I am trying to do is to allow the web servers on VLAN 2 (Private side) to be able to use http/htt...
While attempting a manual upgrade of the code on my css 11500 I (apparently successfully) copied a compressed adi file from an ftp server to the boot-image using the following command: copy ftp DEFAULT_FTP <filename> boot-image. The copy finishes suc...
Hi,I use the cookie insertion feature of the CSM. Whatever the value of the timeout (2 minutes in the examplebelow), the expired date (of the cookie file) which the CSM returns is always the same one : Fri, 1 Jan 2010 01:01:50 GMT Any idea ?Regards,P...
I'm having trouble getting active FTP traffic to pass properly through the CSS from clients to servers. Only one server is doing FTP, so no load balancing is involved. Our outbound NAT address, from the servers, is different than the inbound VIP addr...
Hi all.I am experiencing troubles with the script "commit_redundancy". I can see from the debug (-d switch) that the problem arises when Master CSS tries to remote copy the file tmp.cfg to the Slave CSS because it doesn't exsist. Disks are almost emp...
HiDoes anyone know if the is possible to turn off the SYN Proxy feature on a CSM. We have a DDOS device also doing SYN proxy and multiple SYN proxies seem to be causing our application problems.
