Application Networking

Hi there,We have two CSS11501 configured in redundant configuration (VIP and virtual if redundancy). All the time we are getting messages on CSS1 like:7 MAR 09:15:47 1/1 168713 WCC-4: CsdSfmSendStickyUpdate: Sending of sticky table update message fai...

I use CSS 11501 to accelerate ssl sessions and autheticate users.CSS gets the certificate from the client browser. The certificate DN contains for example:"CN=info1, SERIALNUMBER=REGON: 321123321, OU=info2, O=info3, C=PL".The CSS sends the certificat...

I have one web server attached on a Catalyst and then with NAT it can be accessed from the Internet through the PIX. The default gateway of the web server is the PIX. Now, I want to connect the second network interface of the web server on the CSS an...

Is WCCP supported on Sup720 currently ? If not, when will it be supported ?

I have a content rule on a CSS 11501 running version 07.40.1.03 that has two services assigned to it. If both of these services are down the content rule still shows as alive on the css. What I would like the ability to do is to either use snmp to mo...

Hello, I'm configuring two CSS11501 in High Availability. Both devices run the version 7.30.0.05 (Standard Feature Set) of the management software.The general project’s requirements for the CSSs are:A) Balance the requests to the two Front-End machin...

We have 20 term servers behind a 11500 with RDP connection limits set to 4 because of heavy resource utilization on the application running there. With max connections at 6 the CSS could potentially go over but we thought it would distribute them mor...

Has anyone had a problem getting their content engine to cache Yahoo mail, Hotmail, etc.. My CE is fully caching everything, but after authenticating to these webmail sites, clicking on the inbox link results in a blank page. Any ideas anyone? Any he...

I have several regional offices connected through wan to central office. Configuration: 2*7206 with wccp v2 and CE565 and CE560 (CEs clustered).Http traffic from regions thorough wan redirects to ce.. It worked perfectly with acns 5.1.3.15 until i ha...

Hi:I need balance packets HTTP but distinguer between method GET and POST. Is it possible?I have installed version 5.0Thanks, Guillermo.

In the Global Proximity Configuration, the "wait" parameter is disabled by default. GSS Documentation says that the GSS does not wait to perform proximity selection if it has not received the appropriate RTT information and proceeds to the next balan...

When the CSS keepalive shows the state as "dying" is it still sending traffic to that server? or is it holding the traffic in its buffer?What does the user see?thanks

I am trying to determine if there is the ability with a css11501 running version 07.40.1.03 to authorize indivdual commands. Basically what I would like the ability to do is extend the "user" security level to have the ability to suspend and re-activ...

Here is my very simple configuration:!Active version: ap0610405configure!************************* INTERFACE *************************interface e1 bridge vlan 20 description "web1"interface e2 bridge vlan 20 description "client"interface e5 bridge vl...

We want to set up a keepalive for a TFTP server. Is it possible to build a script for TFTP? Has someboy an idea to solve this problem? We tried to fetch a file from the server. The server is answereing but because of a differrent source port the CSS ...