Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I've got a ten gig interface on a 6509 running 12.2(33) configured as a trunk, but I've not been able to add any allowed VLANs as I've done before on other ten gig ports on different 6509 chassis. Am I missing something obvious?I'm assuming that t...
Hi,My question relates to the migration of an existing Sup720 configuration to a new Sup2T. At present we have a Sup2T chassis in the lab running 15.0(1)SY1 and a production Sup720 chassis running 12.2(33)SXI5.I've taken a copy of the production star...
Hi,We've just invested in a pair of Sup2Ts to upgrade a Sup720 6509 chassis but I'm unsure exactly how the management port(s), aka theConnectivity Management Processor (CMP), should be configured (and patched) in a dual supervisor system?Is each CMP ...
Hi,I'm aware that a single FWSM has a total throughput of ~5.5Gbps but can an indivdual interface pass more than 1Gbps of traffic (full duplex)?thanks in advance
Hi,I've a quick question regarding using PAT (port address translation) on an ACE module specifically for the purpose of load-balancing requests to a cluster of Exchange CAS servers.Each CAS server needs to see requests from the same source IP which ...
Did you ever find a fix for this? I've just hit exactly the same symptoms. High CPU with VMATM Callback at the top and "HLFM-6-ADDR_SYNC" messages in the log. I'm running this c3750-ipbasek9-mz.122-25.SEE2 and probably long over due an upgrade.
Steve, Thanks for getting back to me. You're right that it is by default a dot1q trunk allowing all VLANs, therefore it should work for what I want to do. Port Mode Encapsulation Status Native vlanGi3/39 on...
Hi,Yes, 'boot config bootdisk:startup-config-BGFL_6509_MBAS-020712' remains in the running and startup-config. The only changes I've made to the default config (as attached) are the addition of the 'boot config' command and an IP to vlan 1 (and makin...
Hi Ivan,Thank you for your response but the reason I think the configuration has failed is because none of the 'production' configuration (as held in the 'startup-config-BGFL_6509_MBAS-020712' file) has been added to either the running or startup-con...
Thank you for the reply. Are you able to elaborate a bit more on the cons of using a classic line card like the WS-X6408A-GBIC in this situation. At present each 7206 has a GigE ISP link providing a full internet routing table with the other interfac...
