Application Networking

How does the CDN Installation Wizard locate a CDM or a CE prior to either device having been configured with an IP address? What kind of discovery protocol is it using? CDP? Are the unconfigured CDMs and CEs flooding the network with broadcast traffi...

in Cisco CDN solution,how can I billing based by the content?

Is there any way to pull connection information (either virtual or real) for the servers on a LocalDirector? Right now I have to telnet into the LD and type 'show real' I would like to have something go in and track the number of connections over tim...

Hi,I wanted to know if the Denial of Service attack counters really work? I am seeing them increment, and I want to know what the CSS11000 thinks is a SYN attack?Thanks in advance,Bob James

I have a Local Director config that is using 2 bind ids. The default Bind ID of 0 (default) is allowing a virtual IP to hit three web servers on port 80 and 443. I have the other Bind ID of 1 which sends traffic from a given class C address to web se...

Hi,I have installed a CSS11000 to two routers 7200 that have an E3 connection to internet each. My question is, does the CSS11000 detects a failure in Cisco router's serial down, and then forward the traffic only to one router?.. both routers are in ...

HiWe had the following scenario and everything was great. We had 2 Websense policies that looked for client source IP Address.<br>                              Websense                                   &nbsp    |Client------WAN--------PIX-----3640--...

Is it work place Cache Engine in the MPLS domain?PS. Even Board Router still MPLS enable due to do Inter-as feature.

HiMy cache engine in boot process can't find disk.after boot I can't see any disk with show diskscommand, I boot it with the last version on codebut nothing change.But the cache can detec SCSI Contorler.Can I define harddisk on BIOS like ordinary com...

I am trying to use the "advance-balance url" feature to configure client stickiness on my CSS11151. My URLs look like this:http://www.me.com/stuff/r_preavailsub.jsp?cobrand=2&langrecno=1&sessionid= 199501006120380815&javascript=true&jsessionid=199501...

can anyone tell me how to set up a load balancing config on css that will enable me to LB proxy caches and when they have too many connections then LB against an overload proxy-cache. Such that when the normal proxy-cache farm is under the ceiling of...

I have 2 CSS 11152 and I would like to set them up to load balanced between each other (no the box to box redundancy failover). Would the DNS proximity setup be possible in a single location ? If not, how can I achieve this ?Thaks in advance,Leonel

Hi,any good proposition to suggest that CSS is a better choice than LD? When is LD more "useful" ?

Any known issues?

I have try to run a CE505 with an 827 adsl router but we don't have any command for enable and manage the WCCP in the 827 box.We have try different release of IOS without success.Anyone know if is possible to run in this configuration?ThankEric Masse...