CE-560 "disk01: Problematic"

[pvhoa]

Hello,

I problemed on the ce-560 following:

System Initialization Finished.

CE-560#show disks

ruby_disk: Disk /dev/sdb: cannot open: Device not configured

SYSFS 0.0GB 0.0%

CFS 0.0GB 0.0%

MEDIAFS 0.0GB 0.0%

ECDNFS 0.0GB 0.0%

FREE 30.7GB 100.0%

CE-560#

CE-560#show disks details

ruby_disk: Disk /dev/sdb: cannot open: Device not configured

disk00: Normal (h00 c00 i00 l00) 35001MB( 34.2GB)

System use: 3569MB( 3.5GB)

FREE: 31431MB( 30.7GB)

disk01: Problematic

disk02: Not present

disk03: Not present

disk04: Not present

disk05: Not present

disk06: Not present

disk07: Not present

disk08: Not present

CE-560#show disks current

ruby_disk: Disk /dev/sdb: cannot open: Device not configured

SYSFS 0.0GB 0.0%

CFS 0.0GB 0.0%

MEDIAFS 0.0GB 0.0%

ECDNFS 0.0GB 0.0%

FREE 30.7GB 100.0%

CE-560#

what is problem?

thanks

pvhoa

[jfoerster]

Hi pvhoa,

well give it a try with disk configure. After configuring your "partitions" you've to reboot the box.

Well one thing confuses me: The CE560 normaly ships with 2 DISKs.

(cite: The CE-560 has two internal 36-GB Ultra2 LVD SCSI hard drives and an external SCSI port for attaching a six-drive Cisco Storage Array that increases CE-560 storage capacity by an additional 108 GB (6 x 18 GB). from http://www.cisco.com/en/US/customer/products/hw/contnetw/ps761/prod_release_note09186a00800d9f7a.html)

)

Where is your second disk?

Kind Regards,

Joerg

[crwhite]

Your disk01 has failed. Contact Cisco Tac for a replacement hard drive.

Craig

[1jgilmore]

Your unit needs to be replaced. I have 68 units in my network and that is the number one failure ... bad harddrives