CE500 CFS Disk is not being used at all

[richardp]

This is a new installation using WCCP v2. Even though the engine is registered with the IOS router and the router is definitely forwarding traffic to the CE, no disk space is being utilized at all and my savings is reported as 0. I've verified that the CFS volume is mounted successfully. Here is my current CFS disk stats:

Volume0 49.754 G 0 K 0 K 0 K 0 K 0 K

Thanks in advance.

[beth-martin]

This happens when you get a lot of disk errors . This is most likely the cause of the problem. Reconfigure the disks and reboot. Once the CE comes back up, let it run for sometime after which you could check if you are getting any logs on your CFS disk.