02-27-2012 06:53 PM
If I need to change the RADIUS or TACACS+ servers IP addresses for the CM authentication, can I just make the change in the CM GUI page? Or I should access the CM using CLI and change the device to "local authentication" before changing the RADIUS / TACACS+ details?
Thanks!
Joe
Solved! Go to Solution.
02-28-2012 01:27 AM
Hi Joe,
You should be able to do it directly from the CM. However, I would strongly recommend you to change to local authentication first in case there are any issues. If you don't, you may get locked out of your devices.
Regards
Daniel
02-28-2012 01:27 AM
Hi Joe,
You should be able to do it directly from the CM. However, I would strongly recommend you to change to local authentication first in case there are any issues. If you don't, you may get locked out of your devices.
Regards
Daniel
03-05-2012 01:37 AM
Thanks Daniel for your answer!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide