checking CSM status via SNMP

[lukaszkhalil]

Hello

Does anybody what SNMP OID should be pooled to check the redundancy state of the CSM module ? I would like to check if the module is in the active or standby role.

Thanks in advance

Regards

Lukas

[Syed Iftekhar Ahmed]

From my notes ..

See if its still valid

MIB: CISCO-SLB-EXT-MIB:cslbxFtState.9

OID: 1.3.6.1.4.1.9.9.254.1.10.1.1.7.9

The last digit is the slot where the CSM module is installed.

Possible Return Values:

1 means not configured

2 means Initializing

3 means Active

4 means Standby

Thanks

Syed Iftekhar Ahmed