07-25-2011 04:50 AM
Hi All,
I am getting memory size does not match with model type" alarm in Cisco WAE-674 Appliance. Attached is the required information.Waiting for your kind response.
07-25-2011 05:47 AM
Hi Vijay,
A 674 is supposed to have either 4 or 8 GB of RAM as you can see from the data sheet:
In your case it has 6Gb:
6144 Mbytes of Physical memory.
Detailed Memory Device (DIMM) configuration
Size Locator Position Serial Number
1024 MB DIMM 1 Bank 1 Not Specified
1024 MB DIMM 4 Bank 1 Not Specified
2048 MB DIMM 7 Bank 2 Not Specified
2048 MB DIMM 10 Bank 2 Not Specified
You'll need to either remove the 2 1Gb modules you have or replace them with 2Gb module to have it working.
Regards,
Nicolas
07-25-2011 10:03 PM
Hi Nicolas,
Thanks you so much for your time and support.
Regards,
Vijay
07-31-2012 12:49 PM
You do have the option of having either 4 or 8 GB in that model, but definetely opt for the 8GB, the cost of 2-2gb pc2-5300 memory chips is very cheap.
674-4GB - 2000 tcp connections and 45Mbps WAN bandwidth
674-8GB - 6000 tcp connections and 90Mbps of WAN bandwidth
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide