03-21-2014 12:34 AM
Dear All,
I have been wondereing in a couple days. My customer only bought one cisco WAVE appliance to be run a WAAS software. My question is:
1. With this one WAVE appliance, could I run Central Manager and WAAS software simultaneously?
2. If I can't run Central Manager and WAAS software simultaneously, How can I configure the WAAS without Central manager?
Thanks
Hartono
03-21-2014 02:36 AM
Hi Hartono,
Single device can either act WAAS accelerator or Central manager, but you cant do both function in single device. Central manager is to manage, monitor and control the edge device in means pushing the policies/software to all edge devices.
WAAS appliance will accelerate the user/site traffic even if you dont have a central manager, but peer end site should have one more WAAS accelerator to understand the traffic flow.
With single device you cant accelerator and optimize the traffic.
Hope this help you .
Regards,
Bala
03-21-2014 02:39 AM
Hi Bala,
Thanks for your answer.
That means, I can configure the optimization policy via Web GUI in the WAAS appliance without Central Manager?
03-21-2014 05:42 AM
Hi Hartono,
Yes you can configure individual WAE using the device manager.
http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v501/configuration/guide/cnfg/device.html#wpxref25636
CM is needed when you have many devices to manage and it is very convenient to push policies, upgrades, monitoring, statistics etc from one device.
As Bala said, you need two WAE's to optimize the traffic.
Regards,
Kanwal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide